Reading time: 11 minutes
AI Mode in Search Console shows up in two places, but neither one shows it alone. AI Mode impressions sit in the Generative AI performance report, mixed with AI Overviews. However, AI Mode clicks go into the Performance report, in the Web search type, with regular search. So to read AI Mode traffic, you have to combine both reports with GA4.
In short
- The Generative AI performance report adds up AI Overviews and AI Mode impressions, but Google’s help doesn’t list a filter that splits the two.
- AI Mode clicks go into the Web search type in Search Console and into Organic Search in GA4. So neither tool isolates these clicks.
- In AI Mode, each follow-up question counts as a new query. As a result, clicks tend to spread across many long queries.
- Before you blame AI Mode for a drop, rule out anomalies and seasonality. Then compare the pages that lost clicks with their AI impressions.
Does Search Console show AI Mode data?
Yes, but only in part. AI Mode in Search Console appears in the Generative AI performance report, which counts impressions by page, country, date, and device. On the other hand, AI Mode clicks, position, and queries stay in the regular Performance report, mixed with Web search.
According to the Generative AI performance report help, the report covers two Search features: AI Overviews and AI Mode. Also, it’s a slice of the Web search type in the Performance report, not extra volume. Where to find the report and what it leaves out is in our guide to AI data in Search Console.
| AI Mode data | Where it appears | Limit |
|---|---|---|
| Impressions | Generative AI performance report | Added to AI Overviews |
| Clicks and CTR | Performance report, Web type | Added to regular search |
| Position | Performance report, Web type | Mixed with regular search |
| Queries | Performance report, Web type | No sign of whether they came from AI |
In addition, three details from the help change how you read the export:
- Page: the Pages dimension uses the final linked URL, after any redirects, and most data goes to the canonical URL.
- Dates: just like in the Performance report, all dates are in Pacific Time.
- Zeros: values shown as ~ or – become zeros in the downloaded file. In other words, a zero in the spreadsheet can be a missing value.
Can you separate AI Mode from AI Overviews in Search Console?
No, at least based on the current help. The report groups data by page, country, date, and device. Then the filter at the top splits the search type: Web: text-based and Web: multimodal. None of the options in the help separates AI Mode from AI Overviews. Likewise, the Search appearance list in the Performance report has no type for these two features.
The difference matters because the two features work in different ways. According to the guide AI features and your website, AI Mode and AI Overviews may use different models and techniques. So the answers and links vary between them. Also, Google only shows an AI Overview when it adds something to classic Search, so it often doesn’t appear. Therefore, a rise in AI impressions can come from either one, and the report doesn’t say which. To find out which searches show the AI Overview, see how to check whether a keyword has an AI Overview.

How are AI Overviews and AI Mode impressions counted?
In both features, impressions follow the standard Search Console rule, and a click counts when someone opens an external page. The difference lies in position and in follow-up questions. In an AI Overview, all links share a single position. In AI Mode, however, each follow-up question becomes a new query.
The rules are in the help page on impressions, position, and clicks, and the AI data guide above explains each one.
In practice, the follow-up rule should spread the data out. For example, in a hypothetical five-question chat in AI Mode, each question would count as its own query. Each would get its own impressions and clicks. As a result, AI Mode clicks likely split across many long queries in the Performance report.
However, some of these queries may never reach the table. According to the help page on data discrepancies, the table leaves out rare queries. They only count in the chart total. Also, the table shows at most 1,000 rows. So the sum of the queries in the table can fall below the total.
Can you separate AI Mode clicks from regular organic traffic?
No. In Search Console, AI Mode clicks go into the Web search type of the Performance report, along with blue links. Likewise, GA4 puts them in the Organic Search channel. So neither tool shows how much traffic came only from AI Mode or only from AI Overviews.
In fact, the AI features and your website guide confirms the first part. Sites that appear in AI Overviews and AI Mode count in the overall search traffic in Search Console, in the Web type. Meanwhile, the GA4 channel definitions confirm the second part. Organic Search includes AI Overviews and AI Mode, while the AI Assistant channel excludes both. What that channel does catch is in our guide to AI traffic in GA4.
Still, you can measure each page’s exposure with the AI share method from the guide above. In other words, compare a page’s AI impressions with its Web clicks for the same period. A page with many AI impressions and falling clicks deserves a closer look. But this math shows exposure, not cause.
How do you read AI Mode in Search Console alongside GA4?
According to Google, Search Console is the source of truth for Search performance. Google Analytics, on the other hand, is the source of truth for behavior on your site. So use Search Console to see if a page appears in AI Mode. Then use GA4 to see what organic visitors do next.
- In Search Console: export the pages table from the Generative AI performance report and from the Performance report, for the same period.
- In GA4: open the Landing page report with a filter for sessions from Google organic search.
- Match the filters: use the same country and device in both tools, as Google recommends.
- Compare by page: put AI impressions, Web clicks, sessions, engagement rate, and key events side by side.
To see this comparison every month on a single screen, build an SEO dashboard in Looker Studio.
Also, look at quality, not just volume. Google says clicks from results pages with AI Overviews are higher quality, meaning people are more likely to spend more time on the site. However, that claim comes from Google itself, and it doesn’t cover AI Mode. So check in GA4 whether the engagement rate of pages with the most AI impressions went up or down.
Finally, don’t expect the numbers to match. Search Console uses Pacific Time and reports only canonical URLs, while GA4 uses the time zone set in the property. For Google, what matters is that the trends follow the same pattern.
Traffic dropped: how do you know if AI Mode caused it?
Start by ruling out other causes, because Search Console doesn’t isolate AI Mode traffic. Google’s guide to debugging Search traffic drops recommends that you check anomalies, compare periods, look at seasonality, and find the pages that lost the most clicks. Only then should you compare those pages with their AI impressions.
- Check anomalies: the Search Console data anomalies page lists logging errors. For example, from May 13, 2025, to April 27, 2026, an error affected impressions, CTR, and average position, but not clicks.
- Compare periods: in the date filter, use Compare last 3 months to previous period or Compare last 3 months year over year.
- Open 16 months: the long window shows whether the drop repeats every year, for example around a holiday.
- Find the pages: in the pages table, sort by Clicks Difference.
- Test seasonality: take the top queries to Google Trends to see if the drop hit only your site or the whole web.
- Cross-check with AI: see if the pages that lost the most clicks are among those with the most impressions in the Generative AI performance report.
One pattern, however, calls for care. If impressions stay the same but clicks drop, the guide points to the page title and snippet. It also points to a more appealing rich result from another site. But the guide doesn’t mention AI features. So treat AI Mode as a hypothesis to test, not as a fact.
How do you interpret the page comparison?
The reading below is ours, built on Google’s rules, so it isn’t an official method. Therefore, use the table to choose which pages to investigate first.
| What you see | Likely reading |
|---|---|
| Many AI impressions and falling clicks | The AI answer may be meeting the need without a click |
| Many AI impressions and steady clicks | AI exposes the page without taking traffic |
| Few AI impressions and falling clicks | Look for another cause: ranking, technical issues, or demand |
| Steady clicks and falling GA4 sessions | Tag, consent, or attribution in GA4 |
The last row comes from the discrepancy reasons Google lists, for example pages without the GA4 tag and declined cookies.
What doesn’t Search Console show about AI Mode?
Search Console only shows links on Google. So the Generative AI performance report doesn’t include the question that led to the impression or the text of the answer. Likewise, brand mentions without a link and competitors named in AI Mode are missing. Also, ChatGPT, Perplexity, and other assistants are left out.
By Google’s definition, an impression counts the times a link to your site was shown. So an answer that names your brand without a link shouldn’t create an impression, although the help doesn’t address this case directly. To cover that part, measurement uses fixed prompts repeated every month, as shown in our guide on how to measure brand mentions and citations in AI. And what changes to appear in these answers is in our guide to Google AI Mode and AI Overviews.
How do you build the AI Mode report for a client?
Show each number with its source and its limit. So the monthly report brings AI impressions by page, plus Web clicks and organic sessions for the same pages, always with the same filters. Then explain what Search Console doesn’t separate, so the client doesn’t read AI impressions as AI Mode traffic.
| Block | Source | How to present it |
|---|---|---|
| AI exposure | Generative AI performance report | Impressions by page and the change in the month |
| Google clicks | Performance report, Web type | Clicks and CTR for the same pages |
| Behavior | GA4, Organic Search | Sessions, engagement, and key events |
| Brand in answers | Fixed prompts | Presence and citations in the month |
The full report, with conversions and an executive summary, follows the SEO report template for clients.
In addition, five rules prevent the most common misreadings:
- Don’t add them up: AI impressions are already inside Web impressions. So adding both counts the same data twice.
- Don’t mislabel: call the Web type numbers Google clicks, because AI Mode clicks are mixed into them.
- Fix the filters: use the same period, country, and device in all three sources.
- Keep the history: export every month, since the Search Console date filter only goes back 16 months.
- Log anomalies: note in the report any data errors that the anomalies page lists for the period.
Which numbers go into the contract is covered in the guide to GEO metrics that prove results.
In short, this report is the Google part of a broader AI visibility strategy. To see how the pieces fit together, read our guide to what GEO is.
Main sources
- Search Console Help, Generative AI performance report (Search) (2026).
- Search Console Help, What are impressions, position, and clicks? (2026).
- Google Search Central, AI features and your website (2025).
- Google Search Central, Debugging drops in Google Search traffic (2025).
- Google Search Central, Using Search Console and Google Analytics data for SEO (2026).
- Google Analytics Help, GA4 default channel group (2026).
- Search Console Help, Data anomalies in Search Console (2026).



